Copyright ©2006 - 2021 HangZhou Longwin Fiberglass Limited
CHINA MOST PROFESSIONAL FIBERGLASS PRODUCT MANUFACTURER
The HG-ZK1500 vacuum and paste line is a lead paste and paste production equipment successfully developed by our company on the basis of drawing on foreign paste equipment and combined with the actual needs of domestic battery production. It is suitable for the paste process section in the production of lead-acid batteries. Complete the functions of lead powder feeding, lead powder weighing, acid water weighing, acid feeding water, quick paste and lead paste storage. The entire vacuum and paste production line adopts PLC programming for centralized control, streamlining, and automated production.
Brand Name | Longwin |
Product Name | Cheap HG-ZK1500 Vacuum paste mixing machine |
Place of Origin | Zhejiang, China |
Maximum weighing powder of the second compound paste | 1200 kg |
Ointment output per hour | 3000~3500 kg |
Power consumption | 55.27 kilowatts (low speed) ~ 75. 27 kilowatts (high speed) |
Certificate: | RoHS |
Compressed air consumption | air pressure: 0.6 MPa |
Air volume | 0.6 cubic meters/hour |
Volume | Φ1170 mm X 700 mm (height) |
1. All materials in contact with lead-acid are made of stainless steel, and the machining of the rotating paste inner cylinder adopts one-time forming, with good concentricity;
2. The gap between the wall and bottom scraper assembly and the wall and bottom of the rotating combined paste inner cylinder can be adjusted within 1mm;
3. The reducer rotates flexibly, works well, and has no special noise. After 1 hour of continuous operation, the bearing temperature rise should not exceed 45°C, and the lubricating oil should be replaced. The reducer is well sealed and does not leak oil;
4. Completely control the opening and closing of the paste outlet door through the hydraulic system, flexible and tightly closed;
5. The machine is stable when empty or fully loaded, the smaller the vibration, the better, the vibration amplitude is less than 3.5mm/s;
6. When the machine is working, the temperature of the lead paste can be reflected in the display interface, and the thermal element is working normally;
7. The needle-type rotor agitator is used to rotate clockwise, and the inner cylinder of the rotating paste is tilted and rotated clockwise, so that the lead paste forms a staggered mixed material flow with a high speed difference during mixing, ensuring uniform paste mixing and no dead ends. The wall and bottom scraper combination can reliably prevent the lead paste from adhering to the bottom and wall of the rotating paste inner cylinder, and accelerate the discharge at the end of the mixing time;
8. All moving parts in the cylinder are well sealed;
9. The automatic high-pressure cleaning device can clean the inside of the rotating paste inner cylinder and the paste outlet system according to the set cleaning program.
Plate manufacturing
Fax:+86-571-87797895
CHINA MOST PROFESSIONAL FIBERGLASS PRODUCT MANUFACTURER