New GFB-XM multi-joint Plate cutting machine

New GFB-XM multi-joint Plate cutting machine

The GFB-XM multi-chip single-channel splitter is a special equipment for rapid and accurate positioning and shearing of a variety of multi-connected plates for small-density lead-acid batteries and motorcycle batteries. It is a lead-acid battery electrode. One of the ideal equipment for board slitting.


Table of Contents


New GFB-XM4 4-joint Plate cutting machine

Brand Name Longwin
Product Name New GFB-XM multi-joint Plate cutting machine
Place of Origin Zhejiang, China
Production efficiency 60-70 pieces/minute
applicable grid size length (350-380) × width (120-135) × thickness (<4) mm
Installed power 5.1KW
Certificate: RoHS


New GFB-XM multi-joint Plate cutting machine

Air consumption 10L/min 0.6MPa
Dimensions 5000×3000×2000mm
equipment weight about 3.1T


New GFB-XM multi-joint Plate cutting machine

1. Film loading part: use stepping motor to support the film to ensure the stability of the film on the pole plate;

2. The film loading mechanism adopts the suction method to supply the film, which can adapt to various specifications of the electrode plate, especially the thickness of the electrode plate is more adaptable;

3. The lugs of the brushing part of the pole plates adopt the method of hanging ears to ensure the accurate positioning of the pole plates;

This machine automatically completes the processes of feeding, brushing, cutting and hanging ears, rail conversion, splitting and unloading. Compared with the traditional splitting method, the production efficiency is higher and the work efficiency ratio is better.

4. The conveyor chain of the equipment adopts a three-stage connection to ensure the consistency of the chain, make the positioning of the pole plate more accurate, and the scrap rate of the sub-board is low;

5. This equipment is an integral machine, and the conversion between the front and back sections of the sub-board does not require manual transfer;

6. ​​Using a unique positioning method, high positioning accuracy, low scrap rate, and good cutting effect;

7, the equipment dust is transported to the outside of the equipment through the belt, which is environmentally friendly and easy to maintain;

8. The electric control system adopts PLC centralized programming control, and works with the pneumatic system. Two working modes, automatic and manual, can be selected, with high automation and easier operation;

9. It is equipped with a dedicated interface for sucking lead dust and a waste ear collecting device. The process of dividing the board is lead-free and dust-free, with a better working environment and good environmental performance.

This model has a high degree of automation and no intermediate transfer links, saving human resources.

Detailed Pictures

New GFB-XM multi-joint Plate cutting machine

New GFB-XM multi-joint Plate cutting machine
New GFB-XM multi-joint Plate cutting machine



Plate manufacturing




LongWin forcus on QUALITY and DURABILITY of VRLA battery and GEL battery on top place, won certificates of CE, UL, IEC, MSDS, Safe sea transport, Non dangerous test…
1. Container/Cover: Made of UL94HB and UL 94-0ABS Plastic, fire resistance and water proof.
2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.
3. Positive plates: PbCa grids minimize corrosion and prolong life.
4. Terminal post: Copper or lead material with maximum conductivity, enhance the high current rapidly.
5.Vent Valve: Allows the release of the excess gas automatically for safety.
6. Three steps of Seal procedures: Ensure battery completely sealed with safety, never leakage and volatile acid, longer life.
7. Silicone GEL electrolyte: Import from Germany Evonik famous brand silicone.


Our Factory




     HangZhou Longwin Industry Limited owns three major production bases.The total area covers 270,000 square meters.It has an experienced and well-educated  team and our products posses more than 100  patents on electronic technology,battery technology and chemical application engineering.
      We offer OEM,ODM and advanced customization services to meet various needs from different clients.Our products have passed CE,ROHS,SONCAP,UL,ISO and other certifications and are exported to Asia,Africa,Europe,the Middle East,the Americas and other regions.We aim to provide the green,energy-saving and safe electrical energy safety emergency products for global users.
      Professional sales managers and technical engineers provide you thoughful services:short lead time and prompt delivery;3year warranty with worry-free after-sales service.
     No doubt that HangZhou Longwin Industry Limited is your best are reliable business partner!


Q1: Are you a manufacturer or a trading company?
A1: We are a factory more than 20years experience to provide good quality with competitive price.
Q2:How about the delivery time?
A2:Ready sample;7 working days for bulk order after your deposit is confirmed.
Q3:Can you print my logo on the batteries?
A3:Yes, OEM is accepted.
Q4:How many years can be use for battery?
A4:Design life 8-10 years under proper use
Q5:What’s the DOD of your battery?
A5:Depend on how deep you use, when power discharge to 20%, 1200 cycle times; when to 50% –800 cycle times; when to 80% —500 cycle times
Q6:Is it 10HR or 20HR?
A6:4AH to 17AH battery: 20HR, 24AH to 250AH battery: 10HR
Q7: If battery damage,how will you solve the problem?
A7:If there is problem happened , we will gather all the picture and according to your using condition to find out what cause this problem. If it is producing problem, we will replace you the new one in the next shipment.

Packing & Delivery



Why Choose Us!


Share with Social Media

Share on facebook
Share on twitter
Share on linkedin
Share on skype
Share on pinterest
Share on reddit
Share on tumblr
Share on whatsapp
Share on email
Share on print
Share on telegram
Share on xing
Share on vk
Share on mix
Share on pocket
Share on odnoklassniki
Share on stumbleupon

Please leave us a message,
and we will reply to you ASAP.

Contact Us